![]() In the diagram below you can see how you can optimally arrange a mains distribution board and a sub-distribution board. We recommend using retractive switches due to the ability to cycle through clicks, double click etc. ![]() As long as the switch provides a contact closure it can be wired into the system and then in software can have as many functions as you want it to. The maximum number of Extension on the Loxone Link is 30.Īlongside the Loxone Touch and Touch Pure switches you can also make any conventional switches become much more useful and multi-functional.Our recommendation is a pair of a CAT7 cable between panels and a twisted pair of panel wire within the cabinet. The Link must be a single twisted pair.The Link has to be terminated at the last device with a 120 Ohm resistor if no Extensions are used then no resistor should be used.The Loxone link MUST be a BUS strictly wired from one device to the next.If you use multiple panels and as such have many Extensions around the project, then the maximum allowable length of the Loxone Link is 500m from the Miniserver to the last extension. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |